Product introduction
VMC-85Lvertical machining center is a CNC machining machine tool that can be linked in three coordinates and has superior cost performance.ltis equipped with(Mtsubishi MRO) CNC system.Drillig, reaming, reaming, spot faceing, tapping, milling, boring and other processingcan be realize . tis suitable for processing parts with high accuracy and productivity requirements. it can completely eliminate some special fxturesand scribing and other processes, greatly reducing the labor intensity of workers. This machine tool is applicable to the driing, milling, boring.tapping and other processing of small and medium-sized plates, plates , shells,valve bodies, cams and other parts with high hole spacing accuracy inindustries such as automobiles, motorcycles, aerospace, military, instruments, meters, electronics, molds, etc.The processing is programmed andthe production cycle is shortened.
The VMC-855L machine tool is equipped withful protection to effectively prevent the cuttig fuid and chips from splashing around, and its shapeis beautiful and generous; Equipped with Taiwan's professional and wel-known companies to produce complete sets of spindles, with goodperformance, strong broaching force and service life; Optional CNC turntable can form four-axis coordinate linkage machining: Spindle oil cooler canbe configured optionally; ptional configuration of automatic chip removal device,combined with the bed structure to ensure internal cleanliness.
Product features
1, X, Y, Z three axis stroke :800x550x550mm
2, The spindle rotation mode is synchronous belt drive maximum speed :8000(ring water spray). 3, the standard configuration of the knife library is disk 24 knife library, to meet the needs of customers.
4，The head group is a heavy box structure with internal ribs strengthened and high rigidity.
5.，Pneumatic mechanism is adopted in the punching mode of the spindle, which can evenly force the spindle and prolong the bearing life.
6, the electrical box adopts internal isolation design, the heating source part of the controller is given to separate, the front use of heat exchanger heat dissipation, to avoid the outside dust into the electrical box; The rear side uses a fan to dissipate heat for the cooling plate. 7, the three axis adopts high precision quenching screw, combined with precision nut preloading and tail prepulling device, to ensure that the backspace and thermal deformation of the machine remain at a low value for a long time.
8, X, Y, Z axis using "P" class roller linear guide, with high rigidity, low noise, can do high-speed rapid displacement and obtain the best cycle accuracy.
9, All finished products are through the laser positioning correction and garden testing, to ensure the best positioning accuracy and servo characteristics, and the machine before shipment through strict inspection measures, to ensure the long-term stability of the machine precision.
Technical Parameters
|
|
Unit |
VMC855 |
VMC1160 |
vMC1370A |
VMC1580 |
|
Table size |
mm |
1000x500 |
1200x600 |
1400x700 |
1600x800 |
|
X/Y/Z axis travel |
mm |
800/550/550 |
1100/600/600 |
1300/700/700 |
1500/800/700 |
|
Distance from spindle end face to workbench |
mm |
120-670 |
120-720 |
87-787 |
158-855 |
|
Distance from spindle center to column |
mm |
590 |
650 |
785 |
855 |
|
Maximum load of workbench |
Kg |
600 |
800 |
1200 |
1500 |
|
T-slot of workbench |
mm |
5-18x90 |
5-78x100 |
5-18x130 |
5-18 |
|
X/Y/Z axis rapid feed |
m/min |
48/48/48 |
36/36/36 |
24/24/18 |
20/20/10 |
|
X/Y/Z guide rail width |
mm |
RGH35P class roller |
RGH45(X/Z axis six sliders) |
RGH45/55 |
6310/6310/5010 |
|
positioning accuracy |
mm |
±0.005 |
10.005 |
±0.008 |
r0.C08 |
|
Repetitive positioning accuracy |
mm |
±0.003/300 |
±0.003/300 |
±0.006/300 |
土0.005/300 |
|
Minimum positioning unit |
mm |
±0.001 |
±0.001 |
±0.001 |
±0.001 |
|
Maximum spindle speed |
rpm |
8000(Ring water spray} |
8000(belt} |
8000 |
6000 |
|
Spindle end taper |
mm |
BT40-150 |
BT40-150 |
8T40-150 |
BT50-155 |
|
Disk manipulator tool magazine |
pcs |
24T |
16/24T |
24T |
24T |
|
Machine weight |
Kg |
6200 |
7500 |
9500 |
12000 |
|
Overall dimension |
mm |
2700x2500x2600 |
2900x2600x2650 |
3700×2900x3200 |
4000x3100x3300 |
The above image data and photograph are for reference only, and everything is subject to actual productions.